From smartphone weather apps to daily health forecasts, air quality alerts have become a regular part of modern life. Yet while terms like “AQI,” “PM2.5,” and “PM10” appear constantly on screens, many people remain unsure about how these numbers are measured or what they actually mean for everyday health.
To clear up the confusion, here is a complete, universal 10-question guide breaking down how air pollution is measured, the key differences between particulate pollutants, and how to read the numbers accurately anywhere in the world.
What is AQI (Air Quality Index)?
AQI is a standardized scale used by environmental agencies worldwide to measure and report how clean or polluted the air is. Think of it like a thermometer for air pollution. It takes complex scientific readings of harmful gases and microscopic dust and converts them into a single, easy-to-read number—typically from 0 to 500—paired with a color code to show immediate health risks.
How is AQI Measured and Calculated?
Automated monitoring stations sample the air 24/7, measure individual pollutants, and convert each reading into a sub-index score. Ground stations and satellite sensors track major pollutants such as PM2.5, PM10, Ground-Level Ozone (O₃), Nitrogen Dioxide (NO₂), Sulfur Dioxide (SO₂), and Carbon Monoxide (CO). Mathematical formulas convert the raw concentration of each pollutant (measured in micrograms per cubic meter, or µg/m³) into a standardized AQI score.
Does the AQI Number Come from PM10 or PM2.5?
The overall AQI number is not fixed to just one pollutant; it is determined by the single highest score among all measured pollutants. The scores are never added or averaged together. For example, if PM2.5 has a sub-index score of 180 and PM10 has a score of 130, the official AQI reported to the public is 180, with PM2.5 listed as the “dominant” or “prominent” pollutant.
What is the Main Difference Between PM2.5 and PM10?
The primary difference is particle size, which determines how deeply they can travel into the human body.
- PM10 (Coarse Particles): Airborne particles with a diameter of 10 micrometers or smaller (about 5 to 7 times thinner than a human hair). Most of these are trapped by nose hairs, mucus, and the upper throat.
- PM2.5 (Fine Particles): Ultra-fine particles with a diameter of 2.5 micrometers or smaller (about 30 times thinner than a human hair). Because they are microscopic, they bypass the body’s natural filters and travel deep into the lungs and bloodstream.
Where Do PM2.5 and PM10 Come From?
PM10 usually comes from physical dust and natural debris, while PM2.5 comes mostly from burning fuels and chemical reactions.
- Common PM10 Sources: Road dust kicked up by vehicles, construction and demolition sites, mining, wind-blown soil, pollen, and mold spores.
- Common PM2.5 Sources: Vehicle exhaust, factory emissions, power plants, wildfires, agricultural burning, and household wood or coal stoves.
Why is PM2.5 Considered More Dangerous Than PM10?
PM2.5 penetrates deeper into vital organs, carries toxic compounds, and stays suspended in the air much longer. Because PM10 particles are heavier, gravity pulls them to the ground within a few hours, and the body can cough or sneeze much of them out. In contrast, PM2.5 can stay airborne for days or weeks, carry heavy metals and toxic chemicals directly into the bloodstream, and increase the risk of heart disease, stroke, lung cancer, and chronic asthma.
What Do the Different AQI Categories and Colors Mean?
While exact thresholds vary slightly by country, nearly all AQI scales follow a six-tier color system from 0 to 500:
| AQI Range | General Category | Color Code | What It Means for Health |
|---|---|---|---|
| 0 – 50 | Good | Green | Air quality is clean and poses little or no risk. |
| 51 – 100 | Moderate / Satisfactory | Yellow / Light Green | Acceptable air; unusually sensitive people may notice mild symptoms. |
| 101 – 150 / 200 | Unhealthy for Sensitive Groups | Orange | Children, older adults, and people with asthma or heart disease may feel effects. |
| 151 / 201 – 300 | Unhealthy / Poor | Red / Dark Orange | Everyone may begin to experience breathing discomfort or irritation. |
| 301 – 400 | Very Unhealthy / Very Poor | Purple / Dark Red | Health alert; everyone faces a higher risk of respiratory symptoms. |
| 401 – 500 | Hazardous / Severe | Maroon | Emergency conditions; the entire population is likely to be affected. |
If the AQI is 200, What are the Exact PM10 and PM2.5 Levels?
An AQI of 200 means at least one pollutant has reached a high concentration threshold, though the exact microgram (µg/m³) figure depends on the reporting scale used:
- Under the US EPA Scale (used by most global apps): An AQI of 200 corresponds to 125.4 µg/m³ of PM2.5 or 354 µg/m³ of PM10 (24-hour average).
- Under National Scales (such as India’s NAQI): An AQI of 200 corresponds to 90 µg/m³ of PM2.5 or 250 µg/m³ of PM10.
- Key Rule: Only one pollutant needs to hit its threshold to push the overall AQI to 200. If PM2.5 hits its limit while PM10 remains low, the AQI will still read 200.
Why Do Different Weather Apps Show Different AQI Numbers?
Different apps convert raw air data using different national formulas and update intervals. Global weather apps (such as Apple Weather or IQAir) generally use the stricter US EPA standard, while local government agencies often use their own national standards (such as European, Canadian, or Indian scales). Additionally, some platforms report real-time hourly readings while others display rolling 24-hour averages, causing numbers to vary slightly for the exact same location.
How Can People Protect Themselves When AQI Spikes?
Simple daily adjustments can significantly reduce exposure to harmful airborne particles:
- Wear an Effective Mask: Standard cloth or surgical masks cannot block microscopic PM2.5. Use a tight-fitting N95, KN95, or FFP2 mask outdoors when pollution levels are elevated.
- Time Outdoor Exercise: Check the AQI before running or cycling outdoors, and reduce intensity or move workouts indoors when readings climb above 150.
- Filter Indoor Air: Keep windows closed during high-pollution periods and use an indoor air purifier fitted with a True HEPA filter to capture fine PM2.5 particles.

